Bootmod3 software license purchase by default includes 1 paid OTS map and you can choose the one most appropriate for your hardware modifications and octane upon license activation. It also includes any other FREE maps listed in the OTS Maps screen.

In case your modifications or octane change or you'd like to try a different OTS map more suited to your needs we offer this OTS Maps Bundle which provides flash access to ALL of the OTS Maps available in the OTS Maps screen for your vehicle.

*** bootmod3 software license required prior to OTS Maps Bundle purchase *** 

This Maps Bundle is for the BOOTMOD3 BMW S58 F97 F98 G80 G82 Bootmod3 Remap/Tune License only.

• Map Customization through Integrated Advanced Map Editor
  
• Customize various map options with dropdowns/toggles/sliders through the Map Configuration screen
  
• Exhaust burble fully end user customizable from OFF to very aggressive mode and anywhere in-between, switchable with the steering wheel controls in efficient vs. sport mode
  
• Boost By Gear end user configuration per map
• Top speed (VMAX) limiter removal
  
• Cold start cat heating cycle (loud cold start)
  
• Catalytic converter efficiency check configurable (ON/OFF) for high flow downpipes (off-road use)
• Re-calibrated Sport Gauges on iDrive
• E85/blend, race gas and meth injection tuning

Power gains with OTS maps based on X3M/X4M non-comp model:

• Stage 1 ACN91 octane: 11%HP / 25% TQ
• Stage 1 91 octane (95 RON): 17% HP / 28% TQ
• Stage 1 93 octane: 21% HP / 31% TQ
• Stage 1 E30 octane: 31% HP / 41% TQ
• Stage 2 ACN91 octane: 13%HP / 28% TQ
• Stage 2 91 octane: 20% HP / 30% TQ
• Stage 2 93 octane: 23% HP / 34% TQ
• Stage 2 E30 octane: 33% HP / 44% TQ
• Stage 2 Race Gas: 33% HP / 44% TQ

** ACN91 maps are for vehicles that fill up with 91 octane that in some places around the Globe can be of questionable quality and not up to 91 (95 RON) standards. Lower than 95 RON (US 91 octane) cannot be used.

Hardware Requirement

*** OBD ENET cable required, available separately

*** bootmod3 OBD WiFi Agent device is not required to use the bootmod3 platform. It is a convenience option that removes the need for using a laptop in the car when using bootmod3's features. If you're looking to simply load a tune on the car without much datalogging and monitoring then using your laptop is the ticket for you.

S58, 93 octane, Bootmod3 Stage 1, Dyno

 For more info take a look at the FAQ here!

• BMW G01 (F97) X3M 2019 - Present
• BMW G02 (F98) X4M 2019 - Present
• G80 M3 2021 - Present (Femto unlock required)
  
• G82 M4 2021 - Present (Femto unlock required)

Note:

• If your car is a March 2019+ model, you may need to visit one of our partner garages to have the car bench unlocked before you can flash your ECU. Please contact us to know more.
• Cars with the latest 2019+ BMW software can also be affected and may require a bench unlock to flash over OBD.

DME removal from the engine bay for unlocking OBD programming is NO LONGER REQUIRED. However, Vehicles with November 2019+ software updates MAY require DME unlock done on the bench to enable OBD flashing. If required you can visit one of our partner garages to have the car bench unlocked before you can flash your ECU. Please contact us to know more.

VEHICLE MANUFACTURER WARRANTY AND EMISSIONS DISCLAIMER

Some items used and/or installed by PRO TUNING FREAKS may void portions of your vehicle’s factory warranty. Some items may not be legal for “on highway use”. PRO TUNING FREAKS makes no guarantees to the legality of any parts used for “on highway vehicles” and accepts no responsibility for compliance with the vehicle’s factory warranty.