Supercharge M240i with Epic Mods Now!

July 3, 2025

The M240i xDrive is already a bit of a menace straight out of the box—BMW knew what they were doing when they dropped the B58 into this compact, all-wheel-drive coupe. But for some owners, "stock" is just German for unfinished.

@remus_m240ix knew that from the jump. What started as a strong stock platform quickly evolved into a finely tuned machine—part show car, part backroad bruiser. With a mix of performance upgrades, aesthetic touches, and a few carefully chosen power mods, this M240i now hits harder, stops quicker, and looks every bit as sharp as it drives.

MST Performance Intake – Let the Turbo Breathe

This build kicks off with a serious airflow upgrade. The MST Performance intake system replaces the restrictive factory airbox with a large open-cone filter and smooth piping for reduced resistance. That means more air, more spool, and a sharper throttle response—exactly what you want when the boost comes on.

By easing up intake restrictions and helping the turbo breathe more freely—especially at lower RPMs—the MST intake gives the throttle a bit more snap and helps the turbo spool up quicker. But let’s be honest, one of the first things you’ll notice is the sound. Under boost, the turbo noise is clearer and more aggressive, giving you that satisfying whoosh that turns every pull into a bit of an occasion.

It’s not a game-changing power mod on its own, but as part of a full airflow setup, it brings sharper response, a livelier soundtrack, and a more connected driving experience.

Front & Side Aero Upgrades – Styling with Intent

The first thing you'll notice about this M240i is how planted it looks—and that’s no accident. A front splitter brings the nose lower to the ground, sharpening the car’s front-end profile and profile and giving you some aero points, however subtle they might be.

The side skirts carry that aggression through the bodyline, tightening up the overall stance without overdoing it. Together, they give the car a much more cohesive look—OEM+ with a bit of attitude.

Rear Styling Enhancements – Subtle But Strong

Out back, the upgraded diffuser gives the M240i a wider, more aggressive rear presence. It's not just a visual change—it helps clean up airflow from underneath the car, too. That said, it definitely looks like it means business.

Topping it off is a boot lip spoiler that finishes the rear profile with just the right amount of edge. It’s not oversized or showy, but it makes a difference—one of those upgrades you appreciate more every time you walk away from the car and glance back.

DBA T4000 Series Discs & Pads – Built to Stop Harder

Power is fun. Brakes are serious. That’s why this build uses DBA’s T4000 Series performance discs, paired with matched pads for road and spirited driving. These rotors are known for their heat management tech—including their signature “Kangaroo Paw” venting (yes, that’s a thing) and thermographic paint markings for visual wear tracking.

The result? Far less fade, better pedal feel, and more confidence when you’re really on it. Whether you’re pushing hard on a Sunday or just want a safer daily, this is the kind of braking setup that punches above its price.

No Glam Shots, Just Serious Gains – The Hidden Upgrades

Not every mod makes for a pretty picture—but that doesn’t make them any less essential. Some of the most critical upgrades on this M240i are hidden beneath the surface, quietly transforming how the car performs under pressure.

The BorgWarner catless downpipe is the first domino in the power chain, allowing the turbo to spool up faster and breathe freely. That extra flow is matched by a Remus resonator delete and rear muffler, giving the exhaust note a deeper, angrier growl without tipping into obnoxious. It's the kind of sound that tells you this isn’t your average 2 Series.

At the core of it all is a Stage 2+ BM3 OTS tune, giving the car a proper recalibration to match the hardware. With multimaps enabled, the owner can switch power profiles depending on driving conditions—whether it's daily cruising or full send.

Helping all this newfound power stay in check are two underrated heroes: a CTS Turbo boost pipe and steel braided brake lines. The former replaces the factory plastic pipe with a reinforced metal unit that holds boost reliably under load. The latter firms up pedal feel and improves modulation when paired with the upgraded DBA brakes.

We might not have photos of these hidden upgrades—but trust us, they’re what take this build from good to great. Under the skin, it’s all business.

Why We Love This Build

What we admire about @remus_m240ix’s M240i is that it’s not just fast for the sake of being fast—it’s balanced, well thought out, and daily-driveable without losing its edge. Each mod serves a purpose, from the improved airflow up front to the braking confidence out back.

It’s a modern, clean build that embraces both function and form—exactly what we love to see at ML Performance and Xatrix.

Got a Build to Feature?

Huge thanks to @remus_m240ix for sharing this brilliant M240i xDrive build with us. It’s got everything we love—clean styling, serious performance, and the kind of thoughtful modding that shows both taste and technical know-how. It’s always a pleasure to feature builds that strike a balance between aggression and daily usability, and this one nails it.

If you’ve built something special with parts from ML Performance, we’d love to see it—especially if you’ve teamed up with a trusted workshop like Xatrix to bring it to life. Whether it’s a weekend warrior, a daily sleeper, or a track-focused monster, we’re here for the stories, the specs, and the passion behind the project.

📧 info@mlperformance.co.uk
📲 @mlperformanceuk on Instagram

Let’s keep the builds coming!